Price (inc. VAT): 52.03 €
Ask for the balance
200 PLC + 802.3af PoE power adapter
Features:IEEE Compliant HomePlug AV and LAN• Designed for home surveillance and wireless applications• Data rate of up to 200Mbps and 300 meters over existing electrical wiring• IEEE 1901 and HomePlug AV standard compliant• Equipped with 10/100Mbps RJ45 ports for LAN/ WAN and auto MDI/ MDI-XPower over Ethernet• Complies with IEEE 802.3af standard, mid-span PSE• Provides 48V DC power over RJ45 Ethernet cable to devices with Ethernet port• Supports PoE power up to 15 watts for PoE port• Auto detects IEEE 802.3af PoE equipment protecting the devices from being damaged via incorrect installation• Remote power feeding up to 100m• IEEE 802.3af splitter device compatibilitySecure Network Connection• Converts any power socket into a wired connection point; Plug-and-Play installation in minutes; no need to configure software• Simple push-button setup with sophisticated data encryption; 128-bit AES encryption for network protection enhancementEasy Installation and Management• Creates a network connection throughout your home without the mess of cables• Easy-to-use utility for powerline network management• Up to 16 Powerline Network Adapters can communicate on a single network• Green technology helps conserve energy when no data link is detected• Integrated enhanced Quality of Service (QoS) featuresTechnical Specifications:• Network Interface One 10/100BASE-TX RJ45 port with 802.3af PoE injector function• One AC power plug with 200Mbps powerline port supporting co-existence with HomePlug 1.0• Button One pair sync / reset button• Power Socket EU power connector; Type C, CEE 7/16 Europlug• LED Power: On / Off / Flashing• Powerline link: Red / Orange / Green / Flashing Green / Off• Ethernet link: Green / Blinking / Off• PoE In-Use: Green / Off• Dimensions (W x D x H) 73 x 34 x 99 mm• Weight 140g• Material Plastic• Power Connector Embedded EU specifications• Power Requirements 100~240V AC, 50/60Hz internal• Power Consumption Full loading with PoE: Max. 16 watts / 54.59 BTU• Standby mode: 0.7 watts / 2.39BTU• Environment Indoor usePowerline Specifications• Powerline Standards IEEE 1901 / HomePlug AV• Data Rate Up to 200Mbps over Powerline and 10/100Mbps over Ethernet UTP cable• Operation Range Estimated range of 300 meters (984ft.) in wall powerlines• Frequency Band 2 ~ 28 MHz• Modulation Schemes OFDM symbol modulation on line synchronization• 1024/256/64/16/8 - QAM, QPSK, BPSK, ROBO carrier modulation• Access Methods CSMA/CA channel-access schemes• Security 128-bit AES link encryption with key management• Nodes Up to 16 per powerline network• Software Utility Device detect / diagnostic• Supports Windows XP, Vista, Window 7 and Windows 8Power over Ethernet Specifications• PoE Standard IEEE 802.3af Power over Ethernet• PoE Power Output 48V DC, max. 15.4 watts, 300mA• Power Pin Assignment 1/2(+) , 3/6(-)• PoE Power Budget 15 watts• Distance Up to 100 meters over Cat 5/5e UTP cableStandards Conformance• Regulation Compliance CE mark• Standards Compliance IEEE 1901 HomPlug AV• IEEE 802.3af Power over Ethernet• IEEE 802.3 10BASE-T• IEEE 802.3u 100BASE-TX• IEEE 802.3x flow controlEnvironment Specifications• Operating Temperature: 0 ~ 40 degrees C• Relative Humidity: 10 ~ 90% (non-condensing)• Storage Temperature: -20 ~ 70 degrees C• Relative Humidity: 10 ~ 95% (non-condensing)
